Locate a Distributor
Profit with world-class products.
Home > Products > Commercial > Split System AC > HHB 090 to 240 Split Condenser

HHB 090 to 240 Split Condenser
HHB 090 to 240 Split Condenser
Nominal Capacities
90 to 240 Mbh

Efficiency
8.7 to 9.5 EER

Warranty
Compressor - 5 Years
Parts - 1 Year
Split System Air Conditioner (HHB) 7-1/2 to 20 Ton
These Luxaire split system air conditioner models are completely assembled, piped, and wired at the factory to provide one-piece shipment and rigging. Each unit is pressurized with a holding charge of R-22 for storage and/or shipping.
The compact design, clean styling, and quiet operation make these condensing units suitable for almost any outdoor location. On rooftops, because they weigh much less than a single-package unit of similar capacity and are much easier to rig and support. At ground level, because their ample sub-cooling capacity allows them to be located 60 feet below the evaporator coil.
All sheet metal parts are constructed of commercial grade (G90) galvanized steel, powder-paint coated to withstand a 750-hour salt spray test.
A complete line of evaporator blower units are offered to meet your precise capacity and air-handling requirements.
Special Benefits
  • Built for efficient operation, long life, and moderate installation costs.
  • Meets or exceeds ASHRAE 90.1 - Energy Standards. 
  • All units have matching Luxaire upflow or horizontal coils for non-furnace installations.
  • The systems, offered in 208/230, 460, and 575 voltages, are easy to handle by the base rails with forklift access and rigging holes.
  • Low ambient operation to 45?F is standard, and accessories for 0?F low ambient operation are available.
  • Installation time and costs are reduced by easy power and control wiring.
  • All units are factory wired, piped, charged, and tested prior to shipment.
  • Factory-installed options further reduce installation costs.
  • Electric utility knockouts are provided on unit side and bottom for easy connections.
  • Full-perimeter base rails are permanently attached to provide a solid unit foundation and fork lift access.
  • Compressor is internally protected against high pressure and temperature.
  • Grooved copper tubes and enhanced aluminum fin construction improve heat transfer.
  • Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
Publications and Manuals
DescriptionPart NumberFile Size
Tech Guides
Technical Guide - H*HB090 thru 150 Split-System Air-Cooled Condensing Units (8.9 - 9.5 EER)246674-BTG-A-04041.3 MB PDF
Technical Guide - H*HB180 & 240 Split System Air Cooled Condensing Units333309-BTG-A-0307413.0 KB PDF
Submittal Drawings
Submittal Data Sheet - HHB 090 Mbh Outdoor Split System Condensing Unit550.23-SD1L-109945.0 KB PDF
Submittal Data Sheet - HHB 120 & 150 Mbh Split System Condensing Units550.23-SD2L-0996270.0 KB PDF
Submittal Data Sheet - HHB180 & 240 Split System Condensing Units332729-LSD-A-030798.0 KB PDF
Application Data Sheets
Application Data - General Piping Recommendations & Refrigerant Line Length for Split System Air Conditioners and Heat Pumps247077-UAD-H-0209435.0 KB PDF
Warranty Information
Warranty - 1 Year UPG Parts & 5 Year Compressor50.05-WC13V-040014.0 KB PDF
Warranty - 5 Year UPG Hermetic Compressor50.05-WC15W-069544.0 KB PDF
Get a good feeling for how good your business can be—contact Luxaire today!

© 2009 Johnson Controls, Inc. All rights reserved.
Site Map | Terms and Conditions | Privacy Policy
Are you a homeowner? Visit Luxaire.com
Make-A-Wish
NATE Certified