Locate a Distributor
Profit with world-class products.
Home > Products > Commercial > Split System AC > HHB 090 to 240

HHB 090 to 240
HHB 090 to 240
Nominal Capacities
90 - 240 MBH

Efficiency
8.7 to 9.5 EER

Warranty
Compressor - 5 Years
Parts - 1 Year
Split System Air Conditioner (HHB) 7-1/2 to 20 Ton
These Luxaire split system air conditioner models are completely assembled, piped, and wired at the factory to provide one-piece shipment and rigging. Each unit is pressurized with a holding charge of R-22 for storage and/or shipping.
The compact design, clean styling, and quiet operation make these condensing units suitable for almost any outdoor location. On rooftops, because they weigh much less than a single-package unit of similar capacity and are much easier to rig and support. At ground level, because their ample sub-cooling capacity allows them to be located 60 feet below the evaporator coil.
All sheet metal parts are constructed of commercial grade (G90) galvanized steel, powder-paint coated to withstand a 750-hour salt spray test.
A complete line of evaporator blower units are offered to meet your precise capacity and air-handling requirements.
Special Benefits
  • Built for efficient operation, long life, and moderate installation costs.
  • Meets or exceeds ASHRAE 90.1 - Energy Standards. 
  • All units have matching Luxaire upflow or horizontal coils for non-furnace installations.
  • The systems, offered in 208/230, 460, and 575 voltages, are easy to handle by the base rails with forklift access and rigging holes.
  • Low ambient operation to 45°F is standard, and accessories for 0°F low ambient operation are available.
  • Installation time and costs are reduced by easy power and control wiring.
  • All units are factory wired, piped, charged, and tested prior to shipment.
  • Factory-installed options further reduce installation costs.
  • Electric utility knockouts are provided on unit side and bottom for easy connections.
  • Full-perimeter base rails are permanently attached to provide a solid unit foundation and fork lift access.
  • Compressor is internally protected against high pressure and temperature.
  • Grooved copper tubes and enhanced aluminum fin construction improve heat transfer.
  • Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
Publications and Manuals
DescriptionPart NumberFile Size
Tech Guides
Technical Guide - H*HB090 thru 150 Split-System Air-Cooled Condensing Units (8.9 - 9.5 EER)246674-BTG-A-04041.3 MB PDF
Technical Guide - H*HB180 & 240 Split System Air Cooled Condensing Units333309-BTG-A-0307413.0 KB PDF
Submittal Drawings
Submittal Data Sheet - HHB 090 Mbh Outdoor Split System Condensing Unit550.23-SD1L-109945.0 KB PDF
Submittal Data Sheet - HHB 120 & 150 Mbh Split System Condensing Units550.23-SD2L-0996270.0 KB PDF
Submittal Data Sheet - HHB180 & 240 Split System Condensing Units332729-LSD-A-030798.0 KB PDF
Application Data Sheets
Application Data - General Piping Recommendations & Refrigerant Line Length for Split System Air Conditioners and Heat Pumps247077-UAD-H-0209435.0 KB PDF
Warranty Information
Warranty - 1 Year UPG Parts & 5 Year Compressor50.05-WC13V-040014.0 KB PDF
Warranty - 5 Year UPG Hermetic Compressor50.05-WC15W-069544.0 KB PDF
Get a good feeling for how good your business can be—contact Luxaire today!

© 2012 Johnson Controls, Inc. All rights reserved.
Site Map | Terms and Conditions | Privacy Policy
Are you a homeowner? Visit Luxaire.com
Make-A-Wish
NATE Certified